Matt black color, clear coat
- This topic has 15 replies, 4 voices, and was last updated 13 years, 3 months ago by .
- Posts
http://www.refinishnetwork.com/user-tools/photos/3089-kowmen/album?albumid=58
This is my FIRS ALL CAR PAINT JOB, its matt black, with deeber clear coat, but clear coat is paint bad what i will do with? can you help me, polish with 3m or what? i thing when i used 2000 under water to all car? and than polish it? what do you thinK?Is it matt clear or gloss ? Need more info
I paited it with matt black color, and than i painted it with matt clear coat deeber 1-105, what i can do with to get to same paint 🙂 i think water sand 2000
Sand the clearcoat flat with 600 grit and shoot 2 more coats
i will try it on hood 🙂 thanx a lot 🙂
I use 1-105 quite a lot.
Make sure you stir it up really well. I go for at least 5 minutes with a fresh tin. All the gelled up stuff in the bottom needs to be completely mixed in. I then mix it 2:1 with 10% reducer.
Sand it as smooth has suggested, then make sure your coats are going on nice and wet and even. The thicker you apply each coat the more satin (less matt) it will eventually dry, as the matting agent sinks within the paint film, increasing the gloss level slightly. So try and get it wet and even, but not too thick, especially on your last coat. That’ll give you the matt-est finish.
DeBeer also have a matting agent you can add to the 1-105 to give an even more matt finish, but I can’t remember the product code.
if it be real i want only finish it wihtout new clear coat but if i read this i think i must do new coat 🙁
and what do you think about my first all paint job? be critical i want learn it 🙂
[quote=”kowmen” post=25472]and what do you think about my first all paint job? be critical i want learn it :)[/quote]
looks like it was done with a spray can. i wouldnt suggest respraying it just yet until you practice spraying with a gun first. get the results you want on some scrap parts then redo the car.
Try fixing the dents and the rust first before paint. Keep trying :rock
First i painted bumper, its good, than all car, its not good 🙁 yes its true it look like its painted by can 🙁 i do all it again 🙁 THIS IS PHOTO BEFORE MATT CLEAR COAT 🙁 and this color on it its not HARD because i must use matt clear coat 🙁
Try single stage paint with a flattening agent if you must have flat black and cannot get the matt clear to work.
and what do you think if i buy new flat black color, hard color, with uv filtr and get new paint….can i paint it on this layer? if i sand it? I kit today hood on yours answers….it looks like…
Yes :blink:
FIRST I WILL KIT all what i see and than i try it on some part what new paint will do with old paint 🙁 but if you say its possible and paint dont crack or something i will be happy because this car is my first car and i have it for FUN. IM SORRY FOR QUESTINS 🙁 IM NOT CLEVER ON PAINTING BUT WHEN I FIRST USE GUN I LOVED WITH IT 🙂
- You must be logged in to reply to this topic.