Matthew Smith

Forum Replies Created

Viewing 15 posts - 46 through 60 (of 344 total)
1 2 3 4 5 … 21 22 23
  • Author
    Posts
  • Matthew Smith
    June 27, 2010 at 8:50 am #22120

    Very nice Dinger 😉

    Matthew Smith
    June 23, 2010 at 12:09 pm #22054

    Thanks Ben!

    Matthew Smith
    June 21, 2010 at 2:41 am #21982

    Bloverby it looks fantastic bro.. I somehow missed the part where your friend had passed.. Pretty rad that you are finishing it still.. Many probably would have left it as is..

    I agree with BondoMerchant.. He would have loved it!!

    Matthew Smith
    June 20, 2010 at 12:26 am #21968

    Super nice Bob. Congrats

    Matthew Smith
    June 16, 2010 at 5:32 am #21895

    Nice work Dag.. Good to see you have business bro

    Matthew Smith
    June 16, 2010 at 5:18 am #21890

    Good times right there.. I did a set of 46 fenders that looks exactly like that fender you have.. Man the ones i worked on were trashed all across the top too where they bolted to the rear quarter panel..

    Glad those are gone.. they had lots of mud 👿 :whistle:

    Matthew Smith
    June 16, 2010 at 5:12 am #21889

    Nex I like how you will tackle whatever comes your way… Pretty kewl man.. This will drive you far in this business..

    As I learned long ago.. Fake it till you make it brother :woohoo:

    Matthew Smith
    May 27, 2010 at 5:31 am #21615

    Nice work bro..

    Matthew Smith
    May 26, 2010 at 4:29 pm #21600

    There are allot of things that could cause the clear to die back.. Maybe I missed it but no one seemed to touch on the primer that was used and how the job was done so I will ask..

    1. How many coats of primer? Was it sanded.. How long between when it was sprayed and base shot.
    2. What type of base was shot? How many coats of base.. How much flash between each coat.
    3. How long did base flash off before applying clear?
    4. How much flash time per coat was given on the clear?
    5. How many coats of clear?

    Oh yeah.. Hi all 😛

    Matthew Smith
    March 1, 2010 at 10:16 pm #19833

    Sweeet 👿 Nice ride bro

    Matthew Smith
    March 1, 2010 at 12:14 am #19804

    Cooming along very nicely bro..

    Matthew Smith
    March 1, 2010 at 12:05 am #19803

    Smisco The MS and Universal clear both use the same resins, so the quality is exactly the same, however the MS uses one different solvent.. That solvent makes it appear to be thinner, when it actually has 1% more resin content than the Universal.. Also the clear lays down smoother and flows better/longer..
    It is preferred for flow coating by just about anyone who has sprayed it..

    I have only used the Universal and HS that has now been discontinued and basically replaced with the Euro..
    I have some Euro I am going to spray this summer.. JimC has used more SPI than anyone I know of period.. He loves the new Euro and if I am correct it is becoming his favorite of Barry’s clears and he has used them all!!!

    Matthew Smith
    March 1, 2010 at 12:00 am #19802

    I shoot sealer, base, clear and occasionally thinned down 2k thru my LPH400.. It sprays SPI regular 2k perfect thru it non reduced

    Matthew Smith
    February 28, 2010 at 11:55 pm #19801

    Welcome aboard.. Great place, outstanding group of guys who have worked in the refinish business for a long time..

    Matthew Smith
    January 23, 2010 at 4:16 am #18865

    [b]Nexson wrote:[/b]
    [quote]ah bondooo!!, this is not like you! you know replacing quarter panels and all! :cheer:[/quote]

    :rofl

    Looks good bondo.. Now time to finish waldo.. I finished mine :blush:

  • Author
    Posts
Viewing 15 posts - 46 through 60 (of 344 total)
1 2 3 4 5 … 21 22 23