jackcarlson
Forum Replies Created
- AuthorPosts
- August 31, 2017 at 11:31 pm #92840
been awhile thought i would drop in an say hi!! still enjoying the ppg an have done alot of work to the shop since i made this post…
December 24, 2015 at 8:13 pm #49211good to here things are going good for ya ben.ive had alot of changes for me an my shop too .all good wishing you an your family a merry chistmas! :cheers
October 31, 2015 at 7:49 pm #49111you can get the batterys rebuilt at a place like batterys plus for about 30$ a pop an they last way longer :stoned
March 29, 2015 at 9:21 pm #48546wow now those are really different than anything ive ever seen thanks for sharing :cheers
September 27, 2014 at 8:46 pm #47482[quote=”Charlie” post=35978]Hell I’ll just use my shop vac then ;)[/quote]
all ya would need is an air valve an a tee fitting an some hose really :teach cant believe i spent close ta 150 for the damn thing :wak but im a sucker for gimmicky shit like this :chairSeptember 27, 2014 at 8:41 pm #47480there has been a few times over the years that i just couldnt get a repair to cover no mater how many coats i put on it but the sealed parts coverd in 2 or 3 coats….this vid explained alot on how ta avoid that to me :kofee
September 27, 2014 at 8:34 pm #47478we actually bought one of these all we have managed ta use it for was sucking up a run….but it seem sorta spendy for what it is to be honest i think most guys could get some tips an build your own…its basically a venturi vacuum with a rubber hose really wouldnt be to hard ta make
August 2, 2014 at 10:33 pm #47102most any of those cheap dual purpose products usually blow when it comes ta using them as a sealer..my advice is just use a dedicated sealer from an economy line an skip the stuff that claims to do both…hope this helps :cheers
July 30, 2014 at 8:58 pm #47068you might take some lauqer thinner an see if you can wash it off who knows you just might get lucky…..still sounds like a mess though :chair
July 30, 2014 at 8:54 pm #47067well if you think there is no hardener in the ss urethane im going ta say you must strip ….even if you did manage ta get over it bad things will happen on down the road just my opinion :unsure:
July 23, 2014 at 12:54 am #47026days to repair is always an estimate imho….things can go either way theres just to many variables
- AuthorPosts