Dale owens

Forum Replies Created

  • Author
    Posts
  • Dale owens
    August 15, 2013 at 3:14 am #44076

    Thanks.. I’m massaging a 1970 mustang Fastback now

    Dale owens
    March 12, 2013 at 3:26 am #42040

    :cheers oh ya, the under hood black is SEM Hot Rod Black.. I’ve had really good luck with this stuff..

    Dale owens
    March 9, 2013 at 4:41 am #41999

    Lol.. Not sure.. Probably couldn’t do it again if I had to..

    Dale owens
    March 9, 2013 at 2:55 am #41992

    DuPont Chroma Base. Autoglas euro design ag40 clearcoat by Matrix. I would not use it again, it simply does not flow out(could be me), nor holds its gloss. I have been using Trans Star “Euro” high solids and really pleased with it…..but this matrix really looks just as good once it’s sanded/ buffed.

    Dale owens
    November 13, 2012 at 3:18 am #39143

    Nice

    Dale owens
    November 1, 2012 at 3:34 am #38842

    It’s not my car but, 429 Cobra Jet, fiberglass hood, it’s the real deal. I’m trying to upload some finished paint job photo’s uploaded.

    Dale owens
    October 31, 2012 at 3:19 am #38837

    Thanks, I will get some of it finished and posted

    Dale owens
    October 29, 2012 at 2:10 am #38825

    I stripped it bare. I thought I read somewhere on this site it’s recommended to Epoxy first as a moisture and sealing barrier, but not everyone did this additional step. I guess my theory is that there is just a slight bit more build. As you said, lots of leveling to do,…and the color will be black.

    Dale owens
    October 26, 2012 at 2:49 pm #38805

    Transtar 6000 series.

    Dale owens
    October 25, 2012 at 4:18 am #38776

    It looks like my next gal of filler will be this 3M platinum, I’ve never tried it. I’m always lookin for something better..I’m still looking for the filler that sands and shapes itself..LOL

    Dale owens
    October 16, 2012 at 3:57 pm #38662

    Thanks

    Dale owens
    October 16, 2012 at 3:26 am #38658

    Sounds like I was on track. I have already purchased gal of superfill 4:1. Should I exchange it for Fibre fill..?? Very nice work jeremyb..

    Dale owens
    October 15, 2012 at 11:27 pm #38650

    I just don’t want to have a comeback because fiberglass is popping thru the primer. There’s really not a lot of fiberglass repair to be done, so I’m fortunate there. I was just looking for solid info on the epoxy or polyester to back up my my decision .. Thanks

  • Author
    Posts