brandon dingwell
Forum Replies Created
- Posts
would have been fine if the last guy belived in using sandpaper :compsmash
dont paint below the waterline at all if the guys is gonna keep it in the water. if you do it wont stay on there for long
stang looks good, but for crying out loud..clean them booth walls would ya. Be amazed at how nice a bright a clean white booth is 😉
welcome
DP40 :rock
[quote=”85Hernandez” post=22593
you don’t have to tape up the blue. let the white single stage go down to the doors & sides, then wait for it to dry and run your two tone paint job. of course you’ll have to sand the over spray that got on the blue parts. that way you don’t have that build up line you talking about.[/quote]
:huh:
Obviously you dont tape off for the first color. he will have to tape off the white when spraying his second color. and if he uses single stage the tape line will be thicker than if he uses base coatwell with single stage you need to wait for it to dry to tape on it (overnight) and when recoating it it will need to be sanded. Just use base coat. with SS you are gonna have a lot bigger tape line to bury than with the base
you are comparing a mitsu color to a gm color :whistle:
[quote=”Jayson M” post=22520]Soooo who is the site pro now :p :rofl :rofl PRO DINGER :rofl[/quote]
:rofl :rofl :rofl
[quote=”Amplified Details” post=22514]Could I trouble you to take the time to make a new video of just doing clear in real time? It’s my biggest challenge getting just the right amount and I’d like to watch your technique.[/quote]
No where near as good or as entertaining as Nex’s videos :whistle: but[video]http://www.youtube.com/watch?v=G_KprlQMli8[/video]
Also a little down time from about 3:30 to 6:00 while i let the clear flash
so how much did you have to pay to have a model in the last photo :whistle:
sand a spot down and fing out where the pinholes are coming from. then we can fix the problem 😉
[quote=”bondomerchant” post=22482]do i use it the 2nd or 3rd time when they hit a deer ???[/quote]
you should use it to determine if the parts should be stripped as too much film build is bad.
of course with that piss water paint you use I dont think you need to worry about that :p :p :roflDont listen to those guys Blov. They’re just being diks :whistle:
[quote=”Amplified Details” post=22469]Jesus this is a shit ton of work to fix. Definitely won’t make this mistake again. :deadhorse[/quote]
Yes you will 😛
we all do :whistle: