Mr. Amaya
Forum Replies Created
- Posts
DA front end of hood straight across with 80, 180, 400. Shoot 2k primer and sand. Any rock chips that show up just use kombi putty and let air dry for 15 minutes. Then sand the kombi putty with 600 wet. Inspect primer area and whole hood for rock chips that were missed. Then if you want you can either shoot another coat of primer , sand and then shoot base then clear. If you hood has been previously painted then the paint might be pretty thick. If this is the case then make sure to pay attention to feather edges cause they might show up as minute craters after you shoot clear…
HYPERCLEAR 2 made by Crest. Production Clear . $100-120 for kit… Flows out nicely and minimal texture.