russ knoche
Forum Replies Created
- Posts
i am in ny ,just south of buffalo, shooting onyx , and 55 line. this new clear is going after all the shops that are useing the value clears.basf must have figured itout finally, the also need to sell a cheaper clear .well be priced w/ the limco line but a diamont w/ warrenty,will be shooting again as soon as i get a color for this toyota 8q2,its a lite blue met have like 6 spray outs doing a onyx feild formula as we speek
drive to buffalo ny and i can help you OUT !!!!!!!
what reducer where you useing? mixing it 3-1-1 like tds says to do.???? how much flash time???? i have been useing glasurit and diamont clears for the last 5 years. this stuff is a little different . i shot 2 feneders and a cover yesterday, and a hood this am!
what are you using as a wet bed ??are you also adding it to your base as a blending additive!! sb01-vro -dh100, 2-1-10%.I JUST DID WA636R ON A 2012 IMPALA,AND THE EDGEs of the blend are a little dark side tone . used mpv 1 lighter bluer
just did another 1 w, the optima 30 psi w/glasurit 460 clear ,looking good, i am still likeing the sagola 4400 extreme for the high solid clears,
the gun was factory setup w/swivel air fitting so i have swaped that 4 a sata high flow unit!!! have been spraying at 24psi!!! will take it up on the next 1
i like it a lot! the 3m adapter for pps is #44, still geting use to it,spraying a side of a 2010 malibu as we speak. standox 15-16 plus.trying to find a good air pressure,any suggestions ????
i like it a lot! the 3m adapter for pps is #44, still geting use to it,spraying a side of a 2010 malibu as we speak
just got a optima trifinity 1100 [lvlp 1.3mm tip].havent sprayed w/ it yet,cant wait!!! any 1 know what the pps adapter number is?????
are you also reduceimg the glassurit 90-m5 w/the onyx hb020????.ya the recomenedtion on the clear was also a tech sheet that my basf REP gave me a while back ,he called it a euro blendeing tech.havent used!
$24 a sqt thats a great $$,whos giveing it away!!!!1 how does thta clear sand and buff the next day 24hours
any 1 useing omi-cron #7300 euro clear.43.59% solids by weight,its sold by USC ,us chemical 2:1 euro 4.2 voc.says it made in the UK,there is a supplyer selling on ebay,its the 2.1 voc version #7200 in california.$180 akit 6qts
yes mixed reviews on the transtar as welll .i used the euro classic 7021 for 2 years ,then they changed it,re formula was never the same,what are you paying for the euro kwik 7211$$$$$, on the utech,were are you guys buying ,i cant find it in my area????
the curing booth is a throw in stuff needs to be removed from building by 1st of dec
have to try ag-40, just finishing a gallon of 465-00 nason,have used the pro air in the past nice stuff, mid range for sure$$$,i have a gallon of lesonal LV clear,any one have any exp????solid content?? can seems extra heavy