russ knoche
Forum Replies Created
- Posts
the shop across the street from me is useing it.there adding a gloss and flow enhacer that the matrix rep sample them ,keeps it from dieing back after polishing,ill have to see how its working in this cold weather.how are you mixing it???/ are you bakeing it,if so how long how hot???
i feel the same on the 4000,have been useing 1 4 clear 1.3 tip,plan on cleaning it and will list on ebay,have a 3000 rp 1.4 blue star eddition in the box collecting dust.non digtal.any one useing the adam digtal gauge,seems $$$$$
havent used that 1 yet were are you buying it seems really cheap??/ just finished a gallon of transtar 6841 ,seems to die back a bit. wet sands and buffs really fast,no exp w/long term.still looking
had lkq/keystone come out w/lesonal chip deck ,std had same dark side tone ,lighter var looked A+ a lot lighter,will try there h20 agaain,used it in the past for acouple that i couldnt get in basf!!!any 1 have any tint recomdastions on the onyx ,the tints are so strong, dont no where to start to try the tinting approach whats your idea ???? need to lighting this up + alittle coarser,basf on line has a field formula, that i just found lighter and coarser, may mix 1/4 pint and spray it out!! needs to match really good ,or will need to go into f- doors, anothere free panel to get it to match!!!!!
sounds good ,05-15 must be the fast hardner.any exp w/ fast dry additive???? i will be useing a sagola 4400 xtreme w1.3 tip, 2 coat application, does it stay were you put it when you spray it like you what it to look???/ how long of a flash on 2 coat app, pullled tech sheet, 10 min flash??? not much tech info!!! thats why iam here!!!!!off to anothere long day of spraying!!!!!
iam getting 25% off refinishers on all basf liqued items ,no contract ,use onyx and 55 line
also what base 002 or 004 and o20,040 reducer, iam painting in a cross flow w/ radiant heat above the booth booth temp-stays between 68-75 degrees
are you applying a drop coat on all metalics ??? iam doeing a blue metalic now,, toyota 8r5 have 3 coats and looks real good, iwata super nova hybrid 1.4 gold air cap 16 psi
what size on the cvi needle and tip, which air cap??? thanks russ west collision
dc01 working really good,sands a lot better w/a/little heat,1 hour air dry 2000 flatsins really good ,havent yet da sandend,the cost is the killer $163 for the clear and use dh46 buy the gallon, just used some 5600 seems to work really nice ,will buff it ou in about 2 hours
yes i have been looking at there booths seems to be fair priced ,havent been able to talk to any one that has 1 ,do you use 1 at your job.
any 1 useing it in the states USA, the valspar rep was in a few w=eeks ago and was saying up in canada,its working verey well.debeer is a sister company of valspar.
i dont have any issue sanding it, try a pice of 800 grit da paper by hand ,base needs to be blown dry.try to go only 1 direction when sand or the base will tear ,some times.
is the RP version of this gun avaiable in the usa yet???? some say yes some say no hasnt met transfer rate efficent yet>>> iam close to canada,,road trip