darren

Forum Replies Created

Viewing 15 posts - 151 through 165 (of 212 total)
1 2 3 … 10 11 12 13 14 15
  • Author
    Posts
  • darren
    February 9, 2011 at 5:37 am #28251

    whats going on lild u won’t touch anything with 885 with it.. so don’t go recommending it to anyone…:compsmash even tho i would totally recomend the 885 reducer with all metallic colors with the ppg deltron..

    darren
    February 6, 2011 at 1:06 am #28153

    great job:clappy how was spraying the roof on that one?

    darren
    February 4, 2011 at 6:52 am #28078

    I use the sata vision also and its best one out there imo…

    darren
    February 1, 2011 at 6:45 am #27948

    looks really good so far… and that color is nice..maybe i have sucked in to many fumes..

    darren
    February 1, 2011 at 6:34 am #27942

    now if u guys would quit using that sikkens cheap clear and switch over to some upol clear all problems would be solved:P

    darren
    January 30, 2011 at 5:33 am #27806

    has to much shine to it.. you could of at least made the only new panel not have a dent in it…

    darren
    January 27, 2011 at 6:46 am #27677

    ok..i know nothing about that clear but it looks really good..

    darren
    January 27, 2011 at 6:26 am #27671

    are u getting paid to paint the cover twice? blend and be done…

    darren
    January 27, 2011 at 6:24 am #27670

    wow. that is really nice.. did u use the 1.2 tip for the clear?

    darren
    January 27, 2011 at 6:20 am #27665

    pull it outside and then decide if u wanna blend the fender or not…

    darren
    January 24, 2011 at 4:10 am #27577

    [quote=”Whitesnake” post=17487]What caps are you spraying with? Are they the hvlp or compliant?[/quote]
    i am using the 7E7 aircap which is the compliant one.

    darren
    January 24, 2011 at 4:03 am #27576

    another fine job done nex.. where is the cat??:P

    darren
    January 24, 2011 at 4:01 am #27575

    yes jayson i agree i think i will still buy an Rp for using for clearcoat sometime in the near future just for the speed of it..i have to admit with the tekna for clear coat i get a little less wave then the Rp but that is because i haven’t used an Rp to much and this tekna sprays similar to what i am used to..

    darren
    January 23, 2011 at 7:29 pm #27561

    Here is a couple pics of car sprayed with tekna

    This one is for llid if only could convince him to use the 3085 hardener in 3000 clear:whistle:

    Attachments:
    darren
    January 23, 2011 at 7:13 pm #27557

    so here is what i got after using them for 2 days.. they work really really well for basecoat best i have used and liked for that.. As for clear coat it will lay it down really nice but it is a little slower then the RP..U have to remember i have an adiction to devilbiss guns so others may not like these guns at all:whistle: .. saying that i have tried most other brands of guns. Sata are awesome guns.. and iwata i did not like at all…

  • Author
    Posts
Viewing 15 posts - 151 through 165 (of 212 total)
1 2 3 … 10 11 12 13 14 15