darren

Forum Replies Created

Viewing 15 posts - 166 through 180 (of 212 total)
  • Author
    Posts
  • January 23, 2011 at 2:00 am #27544

    yes i agree with the merchant and mo.. check which color sealer dbc recomends under it should be a light grey or maybe even white under that gold..

    January 23, 2011 at 1:58 am #27542

    just leave it in there and charge the customer a little more since u used more material:whistle:

    January 22, 2011 at 7:45 am #27519

    unless it is upol clear..:whistle:

    January 22, 2011 at 7:43 am #27518

    no it was a colbalt and the purple harbor frieght left in the gunwasher…:hunt

    January 22, 2011 at 3:48 am #27516

    :rofl :rofl :rofl :rofl :whistle:

    January 22, 2011 at 12:49 am #27511

    If the clear is too cold could it possibly cause fisheyes when spraying the clear?

    January 21, 2011 at 7:32 am #27498

    got 1.2 and 1.3 tips with both guns.. used the 1.2 for base today and think i will try the 1.3 for base tomorrow.. i will have a better idea of these guns in a couple more days but they seemed to work really well…

    January 16, 2011 at 10:11 pm #27288

    nice little job on the monte..

    January 16, 2011 at 10:03 pm #27283

    u should go another hour and half north to saskatoon then i could hook you up with my brother who is a bodyman there..

    January 16, 2011 at 9:52 pm #27282

    yes good point ben..:kofee

    January 16, 2011 at 7:15 pm #27263

    no special tools are needed to do that job unless the coresupport got pushed back alittle bit as for changing the bumper and fender you could do it and what better to learn on then your own car.. as for used parts check out this website http://car-part.com/ and put it the info about your car then that should give you an idea what the price would be and if there is any available in your area.. there is also a good chance that you will not find the same color parts in used parts so ther is either going to be mismatched parts or paint them or have someone paint them for you.. hope that helps alittle…

    January 16, 2011 at 6:58 pm #27260

    Another great job done mo.. i also have been using the yellow 3m tape for sometime here and haven’t had any issues with it.. for the price it does what i need it to do…

    January 16, 2011 at 6:55 pm #27259

    you should find a used car dealer and do a few cars for them and then u will get it out of your system to fix every little detail on a car even tho they just want a hood painted :whistle:

    January 15, 2011 at 11:08 pm #27224

    looking good so far looks like its a little brighter in ur booth??

Viewing 15 posts - 166 through 180 (of 212 total)