darren

Forum Replies Created

Viewing 15 posts - 46 through 60 (of 212 total)
1 2 3 4 5 … 13 14 15
  • Author
    Posts
  • darren
    August 31, 2011 at 4:47 am #32679

    i agree. it is slower and can’t get the clear as flat with the tekna.. :clappy

    darren
    August 31, 2011 at 4:29 am #32677

    [quote=”Jayson M” post=22192]The tekna is a great base coat gun,but not even close to a sata rp for clear.The rp has superior atomization, speed,and they are bullet proof,for an extra $200 it is money well spent IMO[/quote]

    Have you tried it out for clear? :p

    darren
    August 21, 2011 at 3:38 am #32575

    nice work nex. :clappy

    darren
    August 12, 2011 at 11:07 pm #32367

    if u used axe deodrant it wouldn’t happen :stoned

    darren
    August 9, 2011 at 4:17 am #32206

    I am guessing it is the same clear in the deltron line..Dc4125 as u can only get this clear in quart cans also so they probably made a new label and sent it to the nexa line.. It is a decent enuff clear have used it a few times..It sprays and lays out nice. just don’t get any runs or dirt in it because it is not fun to buff.

    darren
    August 3, 2011 at 5:10 am #32052

    nice nice. :clappy

    darren
    August 2, 2011 at 4:00 am #32003

    to coarse sanding scratches for primer, primer not flashed properly between coats..

    darren
    July 16, 2011 at 7:10 am #31784

    Nice work lild.. :weights

    darren
    July 9, 2011 at 4:42 am #31603

    I think that all the problems u are having on your accord is because there is not enuff hardener put in that clear as it states on the can to mix 2 parts clear to 1 part hardener.. so after it is mixed the proper way and it kicks over it will get hard in whatever u mixed it with and should turn to a solid form rather then a liquid..

    darren
    June 26, 2011 at 2:22 am #31450

    Looks like it turned out nice..U must not charge for labor as putting those fog light openings and removing the texture must of cost more in labor and materials then buying the correct cover?? :deadhorse

    darren
    June 18, 2011 at 11:53 pm #31329

    There was a couple small sags i got..but never see them at 60 mph..

    darren
    June 18, 2011 at 11:48 pm #31328

    No we don’t have them over here that i am aware of..Have done a few sets of engine plastic;s in similar color for some VW owner’s .

    darren
    June 18, 2011 at 11:15 pm #31326

    What kind of car those parts off? a VW?

    darren
    June 18, 2011 at 11:10 pm #31325

    Those turned out really nice.. :clappy

    darren
    June 18, 2011 at 11:06 pm #31324

    Will try to get rest of panels. blocked and sprayed towards the end of next week as i am off from work until wednessday..

  • Author
    Posts
Viewing 15 posts - 46 through 60 (of 212 total)
1 2 3 4 5 … 13 14 15