Metal-Flaking & Custom Paint
Some brilliant metal flaking and custom paint work by Keegan Defrance.
Similar Posts
Spraying in a New Paint Booth!
There’s something about spraying in a modern, new paint booth that gives you an indescribable feeling. If only every booth was maintained to look like this forever it would make your life as a painter much more enjoyable. Lighting is incredible, air movement is correct, air filtration and air supply is optimal. Everything tends to…
Custom Painted Xbox Controller
The Xbox 360 Controller is an ABS plastic and gets prepared like any other plastic. The Controller is cleaned and scuffed, then washed with a plastic cleaner and sprayed with a plastic primer. It should be prepared the same way even if you chose to use an aerosol paint.This video of how to paint an…
1968 Chevrolet Camaro
A 1968 Camaro from Ajax Ontario, this car was about a year in the making and painted with the new synergy green from the new Camaro. The paint used on it was from BASF, RM Onyx HD waterborne basecoat and Glasuirt Low-Voc Clearcoat. The Car Started off with a fair amount of rust…
Red Mustang Spray Job
This Mustang had repairs done to the rear end panel, quarter panel and a replacement bumper.The damaged area was painted white before the color coat because it helps the red cover better, known as a ground coat.
How to polish out a Scratch
Here is a step-by-step guide on how to remove a scratch from a car’s paint using sanding and polishing: By following these steps, you can remove scratches from your car’s paint and restore its shine.
Painting With Gabriel Merino of Motivated Painters!
Watch as we jump into the booth with Gabriel Merino, creator of the Motivated Painters movement! Painting a red metallic in one of the largest, premier shops in Canada.