Camaro

Home / Forums / Main Forum / Gallery / Camaro

Viewing 15 posts - 1 through 15 (of 28 total)
  • Author
    Posts
  • February 11, 2011 at 6:20 am #28346

    :hunt :hunt :hunt

    some cheap sealer

    some omniplus base

    no clear on it yet will do that in the morning..

    February 11, 2011 at 7:00 am #28351

    Looks good so far…

    ….now all you need is a mullet

    February 11, 2011 at 11:14 am #28359

    [quote=”Ben” post=18246]Looks good so far…

    ….now all you need is a mullet[/quote]

    YES! a chain steering wheel, and a foot gas pedal.

    February 11, 2011 at 4:56 pm #28362

    [quote=”bobwires” post=18254][quote=”Ben” post=18246]Looks good so far…

    ….now all you need is a mullet[/quote]

    YES! a chain steering wheel, and a foot gas pedal.[/quote]

    I forgot about those pedals…:rofl

    February 11, 2011 at 8:36 pm #28363

    Body looks good so far, are u gonna clear with the rp or tekna?

    February 11, 2011 at 11:24 pm #28364

    Looks good could look better if u didn’t use dt885 in the base. 🙂

    February 12, 2011 at 12:54 am #28367

    what is omni plus btw? is it not the same as mbc?

    February 12, 2011 at 1:21 am #28369

    yes the omni plus is the mbc.. just there new name for it and they added some more toners to it to get more colors..it hides a little better then the old mbc version also..

    February 12, 2011 at 1:24 am #28370

    [quote=”MoCoke” post=18258]Body looks good so far, are u gonna clear with the rp or tekna?[/quote]
    i used the tekna on it.. will post some more pics of it a little later

    February 12, 2011 at 3:09 am #28374

    Do u use the omni reducers or the dt reducers.

    February 12, 2011 at 3:37 am #28377

    Looks nice painter :clappy When I was growing up there was one of those cars on every door step. One night my buddies and I wrecked a mint low mile 4speed car when we were in high school :blush: kind of a shame. It’s nice to see these cars getting fixed up now :stoned

    February 12, 2011 at 4:35 am #28378

    Yup surely don’t see many of those getting much work on them.
    It’s about time they start bringing a few back.

    Looks good.

    February 12, 2011 at 6:04 am #28382

    here’s some pics of it cleared… this was job was done in a half way cheap way as that is what the customer wanted.. all the body work and prep of body and primer were done with a da’ and one of these http://www.nextag.com/Hutchins-Orbital-Action-Sander-797502034/prices-html?nxtg=170e0a500511-BAA3AC7F69AB5CE0 so all and all it turned out good for what was done to it..

    February 12, 2011 at 6:05 am #28383

    [quote=”lild” post=18269]Do u use the omni reducers or the dt reducers.[/quote]
    neither one used the keystone slow reducer for 17 bucks a gallon it not to bad.. ther medium and fast reducers aren’t very good for metallics

    February 12, 2011 at 6:13 am #28384

    nice job on that painter thanks for sharing the pics bet the owner will be tickled:rock :rock :rock :rock :rock looks great

Viewing 15 posts - 1 through 15 (of 28 total)
  • You must be logged in to reply to this topic.