Clear coat issue
- This topic has 0 replies, 1 voice, and was last updated 10 years, 8 months ago by .
- Posts
What’s going on guys, I’m blending within a panel and it was an outdoor paint job. Base when down nice then first coat of clear went down and it rained a little while I was inside causing water spots. I then cleared ontop again for a second coat. After a wetsand and buff, the clear is very rough. What so you suggest? Obviously it should have been done inside but I’m wondering if anyone has any suggestions on how to fix this and make it look how it is supposed to. Thanks guys.
- You must be logged in to reply to this topic.