COMPACT PAINT SYSTEM…….

Home / Forums / Main Forum / Paint and Refinish / COMPACT PAINT SYSTEM…….

  • Author
    Posts
  • April 27, 2014 at 12:41 am #46476

    I have a bulldozer that I am restoring. I understand there is a paint system that will allow you to spray the primer then spray the color right away… kinda like wet on wet. I am sandblasting all the parts and would like to shoot everything without having to sand the primer. I’m not sure if all the manufacture’s make such a system but I know somebody has to….. can anybody point me in the correct direction? just looking for a single stage system… thanks

    Anonymous
    April 27, 2014 at 1:07 am #46478

    After you finish sandblasting, the metal will be a bit to rough to go wet on wet but I guess it all depends on what you want the end result to look like. You can lay down an epoxy wet-on-wet sealer, then any urethane singlestage, For me in BASF I would use EP369 epoxy and UNO singlestage. Every paint line will have similar products available.

  • You must be logged in to reply to this topic.