matrix
Home / Forums / Product Reviews / Paint Products & Systems / matrix
- This topic has 12 replies, 6 voices, and was last updated 15 years, 5 months ago by Matthew Smith.
- AuthorPosts
- May 7, 2009 at 9:26 pm #14251
thinking about demoing some but was curious if anybody here has any experience with it??
May 8, 2009 at 12:09 am #14252I use Matrix, I get it from a body shop down the street, Its good stuff, pretty much a clone of ppg, all the stuff on the mixing bank even has more or less even the same part numbers as ppg (they just change one number or letter).
Color match is generally good, coverage is also good, better than dupont, but that’s not saying much. there clears are good also, and priced right.
I have heard a few complaints about there sealers.
May 8, 2009 at 8:06 am #14255the shop on my street got the whole system from Matrix for $500. And after I think two years the whole thing is theirs to keep. They just have to buy at least $250 a month (toners, clear, hardener, reducer, whatever)
May 8, 2009 at 5:31 pm #14258I use the tonors on some colors as substitute for Dupont, but their clears to me are not user friendly in my experience.
The dry times are longer than I am used to ,most are 16+ hours at 77 degrees, Not really saving any $$$ when you have to leave the heat on all night.
Also, theirs is the only clear that I seem to get solvent pop with.
May 8, 2009 at 9:11 pm #14265I don’t use their system as a whole, I’ve just recently started using a few toners here & there. I notice no difference than the mastertints.
May 9, 2009 at 5:23 am #14267MS-47 and MS-30 are very fast drying clears.
At 70 degrees MS-30 is buffable. Or so the tech sheet says, I have found that it takes a bit longer than that. Still they do have fast clears.
May 9, 2009 at 10:57 am #14272they make good products.. I have used allot of their stuff.. Never any base though :wak
- AuthorPosts
- You must be logged in to reply to this topic.