Panel Bond / Cure Speed

Home / Forums / Main Forum / Auto Body Repair / Panel Bond / Cure Speed

  • Author
  • Anonymous
    June 11, 2008 at 10:22 pm #10669

    I’m just curious to hear some opinions, I have one of our techs about to panel bond on a quarter to a 99 grand am. His plan is to use the norton super fast urethane which gives a 10 minute work time. I wonder why the need to use such a fast adhesive, I’ve always seen most guys use the 6115, 90 minute stuff. Is this gonna dry before its even on, what are your thoughts?

    June 13, 2008 at 5:55 pm #10680

    That is pretty fast but if the area is not too large it should work fine.Just does not leave a very big window if you run into problems.

    June 14, 2008 at 3:45 pm #10687

    10 minutes to stick it on and clamp is plenty of time after it has been fit and trimmed. I like to look at the unclamp time.

  • You must be logged in to reply to this topic.