Rusty Jag for Bondo

Back to: Auto Body Repair13 Replies

Home / Forums / Main Forum / Auto Body Repair / Rusty Jag for Bondo

  • Author
    Posts
  • brandon dingwell
    February 27, 2009 at 5:06 am #12994

    Well here’s my helpers project for the next few days.

    [IMG]http://i288.photobucket.com/albums/ll186/paintbyding/MVC-375S.jpg[/IMG]

    jackcarlson
    February 27, 2009 at 5:10 am #12995

    yep!! that does make me feel alot better about the crown vic:laugh: :laugh: ya got another floor for it??

    brandon dingwell
    February 27, 2009 at 5:13 am #12996

    [b]bondomerchant wrote:[/b]
    [quote]yep!! that does make me feel alot better about the crown vic:laugh: :laugh: ya got another floor for it??[/quote]
    Ya the floor off the same car they used the quarters off of for the original repair :unsure:

    Matthew Smith
    February 27, 2009 at 6:26 am #12999

    Rust.. oh yeah rust.. I see lots of that here:P

    Dennis B.
    February 27, 2009 at 6:57 pm #13007

    That’s nothing I need to post some pics of a 62 Studebaker I have to finish up.
    Lost all my pics of it in my lap top will try to take some today and post them up latter.

    What truly amazes me is how fast you guys turn projects what takes me forever you guys do in days.

    Dave Connolly
    February 27, 2009 at 9:25 pm #13012

    I would like to see pictures of the finished product

    http://www.costamesabodyshop.com

    tim kupec
    February 28, 2009 at 2:59 am #13018

    Hell id just duct tape the holes lay some mat in there and pour about 1/4 inch of resin in. Fixed in about 15 minutes. :laugh:

    jackcarlson
    February 28, 2009 at 3:20 am #13021

    😆 😆 😆 😆

    brandon dingwell
    February 28, 2009 at 3:36 am #13023

    I like pnl’s idea but dont think that will fly 🙁
    heres the donor

    [IMG]http://i288.photobucket.com/albums/ll186/paintbyding/MVC-381S.jpg[/IMG]
    [IMG]http://i288.photobucket.com/albums/ll186/paintbyding/MVC-382S.jpg[/IMG]

    jackcarlson
    February 28, 2009 at 4:05 am #13024

    looks like a few pop rivets an some seam sealer an youll have that in the bag:P 😛 😛

    brandon dingwell
    February 28, 2009 at 5:22 am #13025

    Floors out

    [IMG]http://i288.photobucket.com/albums/ll186/paintbyding/MVC-383S.jpg[/IMG]

    [IMG]http://i288.photobucket.com/albums/ll186/paintbyding/MVC-384S.jpg[/IMG]

    Matthew Smith
    February 28, 2009 at 6:45 am #13026

    looking good Ding.. since that is non structural you should have poured the resin to it. Thats how one of the Pro’s at 101 would do it :laugh:

    Anonymous
    February 28, 2009 at 7:09 am #13028

    cardboard & undercoating would do the trick too… you got me wondering now what old robert’s up to nowadays..

    Dennis B.
    February 28, 2009 at 5:52 pm #13030

    Thats going to be interesting welding that in so close to the fuel Tank. :woohoo:

    Got to busy yesturday to take picks of the The Rust bucket sorry
    I got the trunk floor for it but still looking for front floor’s

  • Author
    Posts
  • You must be logged in to reply to this topic.