sata nozzle set change

Home / Forums / Shop Operations / sata nozzle set change

  • Author
    Posts
  • March 9, 2012 at 11:02 pm #36235

    How do you know when to change it? using Sata 3000 hvlp, noticed some time base is patchy recently or is it something? Had gone back to sata 2000 at mo….

    March 10, 2012 at 9:09 am #36245

    Check for obvious things,look at your air cap to see if the holes are plugged or damaged,look at the needle tip,look at the fluid tip to see if it is round,damaged or dirty.Put up a piece of masking paper and check for a nice fan pattern.Satas are bullet proof, not very often you have to change the nozzle set but if these things don’t check out and your pattern is distorted and everything is clean it is time to change it out.

  • You must be logged in to reply to this topic.