Brad Larsen

Forum Replies Created

Viewing 15 posts - 46 through 60 (of 123 total)
  • Author
    Posts
  • December 3, 2010 at 3:08 am #25761

    This is all Canada’s fault. They got up and left before the bill came:cheers

    December 2, 2010 at 7:39 pm #25755

    I have been to three state fairs, two rodeos, a democratic national convention, a tomato orge, a goat kissing contest and a baptist church and I have never seen anything like it. Nice work.

    December 2, 2010 at 7:33 pm #25754

    Welcome. Hope to see you on the chat box and ventrilo. My screen name is Brad Larsen. I use that because “Bondomerchant” was already taken.:clappy :clappy

    October 17, 2010 at 6:50 am #24305

    I need to get over to Ontario and see you. Nice shop.

    October 17, 2010 at 6:44 am #24304

    paintwerks, you might try cutting the adhesive loose before reworking the bodywork. It may level itself out and simple need regluing.

    October 17, 2010 at 1:24 am #24277

    I have had this happen from time to time, especially on Aluminum panels with inner reinforcement. I have found it beneficial to always break the inner reinforcemnet loose with a metal spatula or spreader and re-glue them after sanding. But be careful not to force adhesive into joints or it will have the opposite effect with humps instead of dips. Only takes 15 minutes and feeds a family of four

    August 20, 2010 at 2:00 am #24044

    Where are you located exactly?

    Brad Larsen

    August 17, 2010 at 6:40 am #23975

    Not using it myself, but was given the tour by a friend who is. Covers good, lays down great and color match is excellent. He was on a “convert with confidence ” program and they came in to make sure they had all of the right equipment and sent everyone to school as well. When they got back the shop was equipped.

    Good luck

    Brad

    August 14, 2010 at 8:32 am #23893

    It is either that or they are talking about alpaca fight club. First rule of Alpaca Fight Club is nobody talks about Alpaca Fight Club. Second rule is if this is your first night, your alpaca has to fight.

    August 14, 2010 at 12:41 am #23886

    This is what I got from it.

    hot in our forum I majeston …. it was about to change it to Phil , but do not get out =)The ore is an Ami -Forum. Find it very well. There are even a couple of experts ….

    August 10, 2010 at 6:06 pm #23749

    Here’s how to tell if your a** is to small

    http://www.youtube.com/watch?v=KCrROBbIPnY

    August 10, 2010 at 8:27 am #23731

    Perverts

    July 28, 2010 at 5:16 pm #23373

    Have a great week! [img]http://www.refinishnetwork.com/media/kunena/attachments/legacy/images/Have_a_great_day.jpg[/img]

    July 28, 2010 at 5:14 pm #23371

    Here are a set of headlights a friend painted a while back [img]http://www.refinishnetwork.com/media/kunena/attachments/legacy/images/paintjob.jpg[/img]

    Attachments:
    July 26, 2010 at 5:30 pm #23326

    One word and bondomerchant is going to agree with me:Russians!

Viewing 15 posts - 46 through 60 (of 123 total)