[Justin]

Justin

May 27, 2010 at 1:56 am #21609

Thanks for the reply Ding, Maybe this will help a bit,

Taken direct from the HoK product website

“DIRECT TO METAL PRIMERS & ACTIVATORS (KD2000 & KDA2000 SERIES)
KD2000 Direct to Metal Primer has been formulated with a hybrid of epoxy and acrylic polymers, which provide excellent adhesion, good corrosion resistance, productive dry times, and ease of sanding. These primers emit very low amount of Volatile Organic Chemicals (VOCs), Hazardous Air Polluting Solvents (HAPS), and contain no isocyanates. KD2000 may be applied to properly cleaned and sanded aluminum, steel, galvanized steel, sand blasted steel, fiberglass and SMC. Can be reduced up to 10% with RU reducer. Mix 4 parts KD2000 to 1 part KDA2000 to 1 part RU Series Reducer (for 2.1 VOC, RU300 must be used)”

KD2000 is the Primer and KDA2000 is the activator.

For further reference here is the actual tech sheet,

[url=http://www.houseofkolor.com/PDF/TechData/English/KD2000.pdf]KD2000 Product Tech Sheet[/url]

[Author]

Posts