brandon dingwell
Forum Replies Created
- Posts
Why do you ask :whistle:
LE5100S 4hr air dry
LE 5300s 2hr air dry
HC2300S 2hr air dry
they are all 2.1voc clears
never tried them, just looked them up on duponts web sitethe Sata 4000 hasnt been as well received by die hard sata fans. Honestly, stick with the tekna’s for now if you are happy with them. you are still in school. no point in having $1500 worth of guns at this stage of the game. Dont buy guns from ABTM either. you will be able to get a better price through your local jobber(likely the one your school deals with)
[quote=”Glen440″ post=25332]I used the green Pro form at the last shop I was at. I had too many adhesion issues with it on plastic repairs. I tried adhesion promoters as well. I also found if you heated it after it was cured it got soft again. Same trying to sand it. We also had some patch failures with it. seperated out in the heat. I didn’t use it for patching but other guys did at the shop. you can really cook the 3m stuff with no issues. I use the heat lamps on it with no issues. I don’t use adhesion promoter with the 3m and it sticks. I’ll bake the stuff to speed up the drying. I can grind it and it stays hard and does not peel off the plastic.
Maybe the Pro Form is better now, its been 6 years at least since I used it.
I only use panel bond to do wheel lips on 1/4 replacement and door skins with metal, the rest is fiberglass and plastic repairs. I doubt I ever had a metal repair failure that I knew of because its also welded so I judge the material with plastics.[/quote]
So you were using structural adhesives for plastic repair :blink:
:welc
never used any of those clears (sorry bad) but by looking at the tech sheets all the other legacy clears are a 4:1 mix (indicative of lower end stuff like FC710) the ec500 is a 2:1 clear which is similar to a lot of higher end clears like Glasurit 🙂
Looks good. Did you use the 1.2
She looked over at me with a slight gaze and some low lying perspiration on her upper lip and said “if you get me wasted, you’re half way there. cause if my mind’s fuked up, my body wont care”
How bout we stop trading gas on the comodities market and let the actual law of supply and demand work. last year the US exported more oil than it imported. So apparently we have enough to take care of us. Lets keep our own oil and and stop buy the crap from other sources. What Iran does should have no effect on the US oil market
[quote=”smooth” post=25252][quote=”Phil V” post=25249]It’s been a while since I last posted here.
Welcome Phil V, im glad you could join us. Its a pleasure to have someone with the class and wisdom like yourself to contribute here. :rock[/quote]
So what did it really say before you edited it :whistle: cause thats not something that smooth would post :pcorn:dynabrade 😉
so how did it go
[quote=”lild” post=25205]even if you can get ppg to bring out some enviro for a demo run, at least you get a feel for it.[/quote]
think the competition is tomm. might be a little late for demos 😛this is mitchell on demand
http://www.ondemand5.com/here is the link for collision repair info
https://www.mitchell.com/shopping/index-mitchell-store.asp
it is a yearly subscription. Not sure of the cost, but its not really something that is used in the collision repair business