brandon dingwell
Forum Replies Created
- Posts
they all have it. dupont is chromalusion, HOK is Kameleon, PPG is Harlaquin. Dont know what BASF calls it. In the end the pearls that they are made out of are manufactured by one company.
never flexed it. dont really think its necessary. its not a bad clear. just put a little extra reducer in it. it layes out nice with an rp 1.2 choked back about 1/2 turn.
ya. i’ve been using those too. they are cheaper and nicer than the SAS ones
all paint. they do plays and skits out of it
well i tied bondo 😛
tough to tape up the roof for a sail panel blend when you have to spray the top of the doors as well. pulling the doors is pretty easy. especially since he had to change them 😉 not that hard to edge and do the outside of the doors at the same time either when he changed them. and if he had any work to do on the rocker or post he could have done all the jambing and 1/4 painting at the same time.
http://www.refinishnetwork.com/forum/gallery/just-a-few-pix-of-the-audi.html
That blend is gonna suck to polish nice. :X probably could have done the roof and smoked in the other sail panel. Or you could have done the doors off the car and not had to worry about clearing the doors and quarter at the same time. would have allowed you to do the blend on the sail.
I did like watching that piece of plastic on the rear door glass hole blow in every time you went by with the gun 😛 . What did you use for the clear on that jimmo
Welcome back. Jimmo keeps messing with the site so every few months it seems new again B) . Good to have ya here and dont be afraid to jump on the shout box or the vent
CONGRATULATIONS. when is she due
hell he spent 8 hours tinting and still blended the door and hood :rofl
[b]Joe@FCAB wrote:[/b]
[quote]Is it me or do those doors look a shade off 😛 Otherwise nice job!! 😛 :silly:[/quote]Its just you 😛
Thanks Nick
Got some pix of it all assembled and cleaned up. now if i can just get this pesky air bag light to go off
[IMG]http://i288.photobucket.com/albums/ll186/paintbyding/IMG_0157.jpg[/IMG]
[IMG]http://i288.photobucket.com/albums/ll186/paintbyding/IMG_0158.jpg[/IMG]
[IMG]http://i288.photobucket.com/albums/ll186/paintbyding/IMG_0159.jpg[/IMG]
shoot it in pieces like Ding 😉 . Even if you jamb it first you can tape the jambs so no over spray gets in there and also so the tape line is practically invisible
I like to paint as much apart as i can. It makes a nicer cleaner job overall.
Ya ryan that is the norton tape.not too bad. smells kinda like bathroom hand sanitizer :blink: . it is a lot stickier than the 3m tape. no more washing out the wheelwells to get the tape to stick 😉 and a 1 1/2 roll was about $1.25 cheaper than the 3mits a 3 stage 😉 3 stages of blue- light to dark to darker 😛