Virtual Painting Simulator
An Oculus Rift / HTC vive application that is currently in development.
Similar Posts
Mazda Soul Red Metallic Crystal – 46V
Mazda 46V paint, also known as “Red Candy,” is a vibrant and eye-catching color option for Mazda vehicles. This bright red hue is perfect for those who want to make a statement with their car and turn heads wherever they go. Mazda 46V paint is a metallic finish that gives the color a shimmering and…
Sata 5500 HVLP / RP – Metallic Blend
A Ford Pickup Truck, J7 Magnetic Metallic being repaired and sprayed using the Sata 5500 HVLP for Sealer & Basecoat, followed by the Sata 5500 RP for Clearcoat application. Sata is known for building professional spray equipment that will last for a very long time and perform well.
How to Blend Metallic Car Paint
How to blend car paint Blending is probably one of the biggest challenges for painters today, learning to blend is ultimately learned through experience, but here are a few tips to help make life a bit easier: 1. Use a similar undercoat – by choosing an undercoat that is close to your topcoat you can…
How to Blend Clear Coat
Blending Clear Coat From time to time it is not practical to clearcoat an entire panel. Blending clearcoat undetectably can be achieved but is not recommended because the blend can be broken down by UV Rays easily and the edge can eventually become visible. Most of the time paint manufacturers will not warranty this type…
SATA 5000 RP VS HVLP: Key Differences
When it comes to choosing a paint gun for your automotive refinishing or other coating needs, two popular options are the SATA 5000 RP (Reduced Pressure) and the HVLP (High Volume Low Pressure) gun. Both of these guns offer advantages and are suitable for different types of applications, so it’s important to understand the differences…
Fixing a Scratch
This shows a minor scrape on a Mazda Miata. The scratch was feathered out, primed and painted using BASF paint. There are many ways to get the job done, this is what was done here: 1. The scratch was feathered out using 280 grit paper until each color was separated around 1/2″. 2. Next…
Is your VR simulator available to purchase?