jackcarlson
Forum Replies Created
- Posts
an the plot thickens :rofl :rofl :rofl
[quote=”PAINTPOT” post=23935]Bleed can be caused by putting to much hardener in the filler as some one mentioned.[/quote]
ta be honest its actually from not putting enuff….no foolin :teach[quote=”Ben” post=23925][quote=”chumpi” post=23921]I am using 3M platinum filler with blue hardener, universal primer, cheap primer
Let me take this opurtiunity to thank every one responding to my post. Thank you guys.[/quote]Like I said before, use a 2k urethane primer surfacer. Since you are using Nason, try their 421-17 or 421-19. It is very inexpensive and is still a very decent quality. You will NOT have bleed through issues with this stuff. If you are using the Nason 421-30 Universal primer, stop. That is a 1k primer and is junk. If you are in a VOC regulated area and are limited to what you can get (where the 421-19 is not avaliable) use the Nason 421-10 2k urethane.
If you insist on using a 1k primer, you will have issues…[/quote]
unless….. ya just use a cheap 1k sealer then u would be golden :teach[quote=”Ben” post=23867]Jayson made a great point about metallics. I would also add that air pressure can be used to lighten/darken the colour like in a drop coat. As well as using a flop controller (if available in your system). Maybe make a note about face and flop, and when you lighten one, you may darken the other.
Otherwise I would just make an emphasis to know how to use any colour charts for your system as well as understanding the 3 dimensions of colour (value, hue and chroma). If you can understand that, then you will understand what adding or removing each toner will do to the colour.[/quote]
just remember painter variables are a throw back ta the lacquer days …… ta be honest it kind of reminds me of the kill system we had back in the day most modren stuff just dont respond to it 😉 either the color is right or not an side tone is….everything when trying ta achive a blendible matchgreat vid jimmo who the fuk taught ya ta paint without jerking that trigger like some dudes 😉 nice flipout at the end of the pnls is all it takes …again nice vid an nice job :cheers
whats wrong with a handful of 10 penny nails :deadhorse
[quote=”Nexson” post=23804]Great for the price, the bumpers however are a bit wavy and they are bare plastic.[/quote]
well on a honda they are nice anything else i go oem :cheerslooks great ding when ya spose u will have it all wrapped up??
[quote=”ding” post=23753][quote=”Jayson M” post=23752]If it hasn’t cured by now you have to strip it,no way around it.[/quote]
I think he was asking what the best way to remove it was :whistle:
Try thinner see if it wipes off
scrape it off
sand it off[/quote]
an if it lasts for more than 4 hrs be sure an call your docter :weights :weights :weights[quote=”smooth” post=23741]I like the 3M system as well. Even though its expensive i thought it was worth every penny. I used it for years but my jobber is telling me the 3000 trizac’s are discontinued. is it true?[/quote]
if ya dont think the 3m aint full of fillers i have news for you 😉 😉 😉 myself i use malco trugrit with an inch an a half wooly an mid cut it with a yellow foam with malco buff lite 2 then glaze it if its a light color i just jump past the glaze[quote=”lild” post=23704]looks great ding. i even love the way you photoshop the front plate so as we couldn’t tell where the car is from.[/quote]
u would 2 if ur match was so bad that ya had ta smoke a solvent blend on the piller :rofl :rofl :rofl :rofl :roflcool vids weeder looks like ya had alota fun :cheers
that colorbiuld must really blow as a primer if it is that touchy reminds me of lacquer primer :p :p :p :p :p
[quote=”bloverby” post=22634]COPACABANA?
You never told us that Barry Manilow was your neighbor. :whistle:
[img]http://showsinlasvegas.info/wp-content/uploads/2009/05/barry-manilow1.jpg[/img][/quote]
an i just like this pic :nothingtoad[quote=”smooth” post=23594]good job. I wonder what they use that boat for? :whistle:[/quote]
looks like water skiing ta me :dnc :dnc :dnc