brandon dingwell
Forum Replies Created
- Posts
looks good mo. A little nuts sanding the base :wak . doesnt look like the guy got it back for thursday :whistle:
[quote=”Ben” post=16082][quote=”bondomerchant” post=16081]getting those frame horns back aint all that hard but id be willing ta bet the one rail is drove back an has a bit of a sag in it so after a guy corrects the end ur gonna have ta pull the diamond out an level the sag out really not that bad of a job but it looks ta me that this guy is just a lil outta his league on this gem :wak :wak :wak :wak i get jobs like this quite often an charge about 500$ ta pull em an figure that give me time ta spend the day with em an most the time im done by noon…no foolin[/quote]
Exactly. It isn’t all that bad of a job…if you know what you are doing and have the equipment.[/quote]
I could make a mess out of it :blush:[quote=”ryanbrown999″ post=16059]$450 a gallon. Man someone is getting butt raped. It’s $197 for 5 liters here. I am not sure there is a clear out there I would pay $450 for.
You will have good luck with both 2002 and 2021. They are both nice clears. Are you shooting in a booth or a garage?[/quote]
You’re right on that one ryan. But maybe he’s adding in the $100 give or take per quart of hardener. that will put ya closer to 400-450 but that would be for 7.5 sprayable liters[quote=”Jayson M” post=16055]Glaso stuff is nice but 923-109 isn’t that great,I would much rather use 2021,more user friendly.Since you brought up other clears,Lesonal glamour clear is about $150 a kit(it looks awesome and stays that way,and it’s high solids),Sikkens HS+ is also nice,and superior 250 is the bomb…but it’s for water only.[/quote]
Dont listen to Jay. He just doesnt like Chip Foose and Foose uses BASF products so he hates those too :p :p :pcorn:[quote=”bondomerchant” post=16046]howdy dont explore 2 much or ya will find out the truth:rofl :rofl :rofl :rofl welcome ta the site:wak :wak :wak[/quote]
:rofl :rofl :rofl :roflWelcome to the site
honestly nothing wrong with either one. 2002 is a little bit thicker than 2021. both spray and look very nice.
how come you left your villager in the ditch :whistle:
also depends on the clear you are using. i used to spray completes with duponts HC7600. a speed clear. spraying bottom up would cause problems. top down was the only way. but with most clears it’s not an issue. chase the wet edge and your fine
It was having trouble conforming to the 4 gallons of filler he used on the roof the last time it was in the shop :rofl :rofl :rofl
looks good barry. there gonna miss ya there i’m sure
[quote=”Gon3R” post=15839]Cheapest I’m seeing is $550 at Autobody toolmart.
http://www.autobodytoolmart.com/search/search.aspx?keywords=explosion
Thanks[/quote]
thats at least cheaper the the $859 one you linked to 😉You can buy explosion proof fans from Autobody toolmart a lot cheaper than that.
Back in the day I bought a whole house fan from home depot mounted it high on the wall, then built a box around it and extended that to the floor so it pulled from down low. put some filters in front of the box, unscrewed the windows from the overhead doors and taped some filters in front of those for the intake air. worked like a charm.
However as a disclaimer.. you should always use an explosion proof fan.[quote=”bondomerchant” post=15753][quote=”ding” post=15752][quote=”ryanbrown999″ post=15739]are you having a refinish network stock the bar party once done??[/quote]
sounds good to me :dnc :dnc[/quote]
im buying the beer though none of that cheap sams stomach bile crap either just always smooth keystome:cheers :cheers :cheers :cheers[/quote]
at least you didnt say Keystone Light :wak :wak[quote=”ryanbrown999″ post=15739]are you having a refinish network stock the bar party once done??[/quote]
sounds good to me :dnc :dncReal good info there ryan :cheers